Wolverton Stoves Stove Bedienungsanleitung

B L A R N E Y / E L S E C A RWOLVERTONSTOVESU S E R M A N U A L

SECTION THREE: OPERATING INSTRUCTIONSPrior to using your stove for the first time, it is essential that all requirements detailed in Section Two have b

10|11II. FUME EMISSIONSOccasional fumes from ash clearance and refuelling may occur. However, persistent fume emission is potentially dangerous and m

VII. FUELOnly premium coal, approved smokeless fuel or wood must be used with this stove. It is best to use dry, well seasoned wood such as oak, ash o

12|13X. OVERNIGHT BURNINGWhen leaving the stove in use overnight, the fire door must be closed. Close all air flow dials and dampen the fire down by cov

XIII. FLUE DRAUGHTSDraught is created by warm air exiting the stove and rising in the collar air of the chimney.Prior to installation, the chimney can

14|15 BAFFLE PLATE CLEANING: The baffle plate must be checked once a month and cleaned of any deposits. This must only be done when the stove is cold.

All stoves feature a comprehensive 1 year parts (glass excluded) and labour guarantee.*This does not affect your statutory rights. Exclusively distrib

GRAFTONSTOVES SECTION ONE: I. Technical Data ...

GENERAL SAFETY INFORMATIONThis appliance must be installed and commissioned by a fully qualified, registered installer. HETAS† registered installers ar

SECTION ONE: I. TECHNICAL DATATOTAL OUTPUT: (KW) 9.0PRODUCT EFFICIENCY (%) 93MINIMUM FLUE PIPE DIAMETER: (mm) 125MAXIMUM QUANTITY OF FUEL - WOOD:

SECTION TWO: INSTALLATION INSTRUCTIONSPlease read this guide carefully prior to installation and retain for reference purposes.I. HEALTH AND SAFETYAl

The installation of this stove is a notifiable building works as defined in the building regulations. It is a legal requirement under England and Wales

IV. FLUE CONNECTIONWARNING: The flue pipe diameter must not be less than the recommended diameter for the outlet of the appliance, stated below. Avoid

V. HEARTH AND FIRE SURROUNDIn conformity with Building Regulations, the stove should be installed on a solid, non-combustible surface such as concret

8|9VI. VENTILATIONIf your stove has a lower nominal heat output than 5.0kW, a purpose provided air vent is not usually required. However, one may nee